|
Search the journal record using manuscript reference number, title of the paper, author names, author affiliations, year, volume, issue, and keywords. |
| Ref. | Title | Authors | Affiliations | Year | Issue | Volume | Country | Keywords |
|---|---|---|---|---|---|---|---|---|
| CST-1.pdf | Single crystals of fullerene (C60) makes organic thick film solar cells and self supporting organic solar cells possible. | Prakash R. Somani (*, A, B), Savita P. Somani (A), M. Umeno (A) | (A) Department of Electronics and Information Engineering, Chubu University, 1200 Matsumoto-cho, Kasugai, 487-8501, Japan. (B) Applied Science Innovations Private Limited, Vijaynagar, Building No. 3, 4th Floor, Dhayari, Sinhagad Road, Pune, Maharashtra, India | 2008 | 1 | 1 | India, Japan | Fullerene, Single crystals, organic solar cell, organic thick film solar cell |
| CST-2.pdf | Dual distributions for the metallic and semiconducting single-walled carbon nanotubes observed by Raman spectroscopy. | Krishnendu Bhattacharyya (*, A), Yoshiyuki Suda (B), Atsushi Okita (B), Takeshi Saito (B), Atsushi Ozeki (B), Masayuki Maekawa (B), Junichi Takayama (B), Hirotake Sugawara (B), Yosuke Sakai (B) | (A) Netaji Subhash Engineering College, Garia, Near Garia Railway Station, Kolkata, 700 152, India. (B) Graduate School of Information Science and Technology, Hokkaido University, North 14 West 9, Sapporo, 060-0814, Japan. | 2008 | 1 | 1 | India, Japan | Single walled carbon nanotubes, Raman spectroscopy, SWCN, Metallic and semiconducting single walled carbon nanotubes |
| CST-3.pdf | Diazoalkane addition reaction on the fullerene dimer C120O and characterization of the resulting mono-adduct. | Lars Weber, Markus Reinmöller, Uwe Ritter | Technische Universität Ilmenau, Institute of Physics, Department of Chemistry, P.O.B. 100565, D-98684 Ilmenau, Germany. | 2008 | 1 | 1 | Germany | Fullerene, Diazoalkane addition, C1200, Fullerene dimer, Carbon nanomaterial |
| CST-10.pdf | Preparation of iron doped carbon coated W18O49 and its photoactivity. | Hany H. Abdel Ghafar, Tomoki Tsumura and Masahiro Toyoda | Faculty of Engineering, Oita University, Dannoharu 700, Oita 870 – 1192, Japan. | 2008 | 1 | 1 | Japan | W18O49, Iron doped carbon coated W18O49, Solid state synthesis, Photoactivity, Photocatalysis, visible light |
| CST-12.pdf | Methane storage in a commercial activated carbon. | C. Guan, C. Yang and K. Wang | School of Chemical and Biomedical Engineering, Nanyang Technological University, Singapore 637459. | 2008 | 1 | 1 | Singapore | Activated carbon, methane storage |
| CST-4.pdf | Magnetic properties of electroless nickel-phosphorus coated multi-walled carbon nanotubes. | Amanda V. Ellis (*, A), James Storey (B), Samuel Wallace (A), Bridget Ingham (B) | (A) School of Chemistry, Physics and Earth Sciences, Flinders University, Sturt Road, Bedford Park, Adelaide, S.A 5042, Australia. (B) Nanotechnology Platform, Industrial research Ltd, Gracefield Road, Lower Hutt, Wellington, New Zealand | 2008 | 1 | 1 | Australia and New Zealand | Multiwalled carbon nanotubes, nanomaterial, magnetic properties, electroless Nickel phosphrous coated MWCN, Carbon nanomaterial |
| CST-9.pdf | The examination of NiO and CoOx catalysts supported on Al2O3 and SiO2 for carbon nanotubes production by catalytic chemical vapor deposition of methane. | Siang-Piao Chai, V. M. Sivakumar, Sharif Hussein Sharif Zein, Abdul Rahman Mohamed (*) | School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, S. P. S. Pulau Pinang, Malaysia. | 2008 | 1 | 1 | Malaysia | Catalyst, catalysis, carbon nanotube production, CCVD, NiO and CoOx catalyst, supported catalyst, methane |
| CST-11.pdf | Characterization of carbon pastes as matrices in composite electrodes for use in electrochemical capacitors. | O. Martinez-Alvarez, M. Miranda-Hernandez | Dpto. Materiales Solares, Centro de Investigación en Energía, Universidad Nacional Autónoma de México, Apartado Postal 34, Temixco, Mor. 62580, México. | 2008 | 1 | 1 | Mexico | Electrochemical capacitor, carbon paste, composite electrode |
| CST-7.doc | Investigation of wetting behavior of coal-chars with liquid iron by sessile drop method. | Rita Khanna (*), Fiona McCarthy and Veena Sahajwalla | School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052, Australia. | 2008 | 1 | 1 | Australia | Coal char, wetting, Sessile drop method, liquid iron |
| CST-8.pdf | Semiconducting, Magnetic or Superconducting Nanoparticles encapsulated in Carbon Shells by RAPET method. | Vilas G. Pol (*), Swati V. Pol and Aharon Gedanken | Center for Advanced Materials and Nanotechnology, Department of Chemistry, Bar-Ilan University, Ramat-Gan, 52900, Israel. | 2008 | 1 | 1 | Israel | Semiconducting nanoparticles, Magnetic nanoparticles, Superconducting nanoparticles, carbon shell encapsulation, RAPET method, |
| CST-13.pdf | Structural, elastic and electronic Properties of isotropic cubic crystals of carbon and silicon nanotubes : Density functional based tight binding calculations | Andrey N. Enyashin, Alexander L. Ivanovskii (*) | Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, 620041, Ekaterinburg, , Russia. | 2008 | 1 | 2 | Russia | Isotropic cubic crystals of carbon and silicon (Si) nanotubes, DFT, Tight binding, theoretical calculations |
| CST-15.pdf | An artificial neural network model of the Chemical Vapor Deposition Processes for Carbon – Carbon composites. | Jianguo Zhao (*), Yong Guo, Feng Feng, Jinsheng Jia, Xiaojun Yuan, Wanhua Xue, Haiqing Wang | Institute of Carbon Materials Science, Shanxi Datong University, Datong 037009, P. R. China | 2008 | 1 | 2 | P. R. China | CVD, Carbon nanotubes, artificial neural network model |
| CST-16 | Adsorption of Remazol Black B dye on activated carbon felt. | Donnaperna Lucio (A, *) , Duclaux Laurent (B), Gadiou Roger (C) | (A) Department of Chemical Engineering, Materials, the Raw Materials, and Metallurgy, University of Rome, ‘La Sapienza’, Via Eudossiana, 18-00184 Rome, Italy. (B) LCME, Laboratory of Molecular Chemistry and Environment, University of Savoie, 73376 Le Bourget du Lac Cedex, France. (C) ICSI, Institute of Chemistry of Surfaces and Interfaces, CNRS UPR 9069, 15, rue Jean Starcky BP 2488, 68057 Mulhouse Cedex, France. | 2008 | 1 | 2 | Italy and France | activated carbon felt, Remazol Black B dye adsorption, water purification, dye |
| CST-17 | Graphane : New Member of Carbon Family. | Prakash R. Somani | Applied Science Innovations Private Limited, Vijaynagar, Building No. 3, 4th Floor, B-14, Dhayari, Sinhgad Road, Pune 411041, Maharashtra, India. | 2008 | 1 | 2 | India | Graphane, Carbon allotrope |
| CST-18.pdf | Magnetic susceptibility of oxygen adsorbed on the surface of spherical and fibrous activated carbon. | Kiyoshi Kawamura (*), Yasunori Makishima, Yuji Ochiai | Department of Electrical Engineering, College of Science and Technology, Nihon University, 1-8-14, Kanda Surugadai Chiyoda-ku, Tokyo, 101-8308, Japan. | 2009 | 2 | 1 | Japan | spherical and fibrous activated carbon, adsorbed oxygen, magnetic property |
| CST-19.pdf | Preparation, microstructure and oxidation resistance of SiCN ceramic matrix composites with glass-like carbon interface. | Yi Xia, Sheng-Ru Qiao (*), Qiang-Qiang Wang, Cheng-Yu Zhang, and Jun-Tao Hou | National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, 547 Mail Box, Xi’an Shaanxi 710072, P. R. China. | 2009 | 2 | 1 | P. R. China | SiCN ceramic matrix composite, oxidation resistance, interface study |
| CST-20.pdf | Preparation of tailored carbons with meso- and micro- porosity via template synthesis route. | Howard M. Williams (A, *) , Elizabeth A. Dawson (A), Gareth M. B. Parkes (A), Philip A. Barnes (A), and Martin W. Smith (B). | (A) Department of Chemical and Biological Sciences, University of Huddersfield, Queensgate, Huddersfield, HD1 3DH, UK. (B) Physical Sciences Department, Dstl., Porton Down, Salisbury, Wiltshire, SP4-OJQ, UK. | 2009 | 2 | 1 | U.K., UK | mesoporous carbon, microporous carbon, template synthesis, porous carbon |
| CST-21.pdf | Phase evolution of matrix of C/SiCN composite during creep testing at 1300 C. | Qiang-Qiang Wang, Sheng-Ru Qiao (*), Yi-Xia, Guofeng Lu, Cheng –Yu Zhang | National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, 547 Mail Box, Xi’an Shaanxi 710072, P. R. China. | 2009 | 2 | 1 | P. R. China | C/SiCN composite, creep, phase evolution, carbon composite |
| CST-22.pdf | Pyrolytic carbon film deposit as an electrochemical interface. | M. Hadi (A), A. Rouhollahi (A, *), M. Yousefi (B) | (A) Department of Chemistry, Faculty of Sciences, K. N. Toosi University of Technology, Seyyed Khandan Bridge, Shariyati Ave., Tehran, Iran. (B) Department of Petrochemicals, Iran Polymer and Petrochemical Institute, Pazhoohesh Blvd., Tehran-Karaj Hwy., Tehran, Iran. | 2009 | 2 | 1 | Iran | Pyrolytic carbon, electrochemical study, electrochemistry |
| CST-23.pdf | Is vacuum annealing converts p-type single wall carbon nanotube field effect transistor (in air) to n-type (in vacuum) is universially true (?) | Prakash R. Somani (*), A. Kobayashi, Y. Ohno, S. Kishimoto, T. Mizutani | Department of Quantum Engineering, Nagoya University, Furo-cho, Chikusa-Ku, Nagoya, 464-8603, Japan. | 2009 | 2 | 2 | Japan | Molecular electronics, single walled carbon nanotube, Field effect transistor, FET, Schottky Junction FET, e-beam lithography, CVD, n-type FET |
| CST-25.pdf | The effect of PTSA on preparation of mesophase carbon spheres. | Youliang Cheng, Tiehu Li, Deqi Jing, Fengjuan Li, Qiang Zhuang | Department of Material Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, P. R. China. | 2009 | 2 | 2 | P. R. China | Carbon spheres, nanoparticles, PTSA |
| CST-24.pdf | Removal of cationic surfactant (CTAB) from aqueous solution onto activated carbon obtained from corncob. | S. M. Yakout and A. A. Nayl | Hot Lab. Centre Atomic Energy Authority, Cairo, Egypt. | 2009 | 2 | 2 | Egypt | Activated carbon, Corncob, water purification, removal of surfactant, CTAB |
| CST-26.pdf | Absorption properties of radar absorbing structure laminate composites filled with carbon nanotubes. | Z. Zhang, T. Li, D. Jing, Q. Zhuang. | Department of Material Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, P. R. China. | 2009 | 2 | 3 | P. R. China | Carbon nanotubes, Radar absorbing material, Composite |
| CST-27.pdf | KOH activated carbon multiwalled nanotubes. | Donnaperna Lucio (A, *), Duclaux Laurent (B), Gadiou Roger (C), and Soneda Yasushi (D),Yoshizawa Noriko(D). | (A) Department of Chemical Engineering, Materials, the Raw Materials and Metallurgy, University of Rome, ‘La Sapienza’,Via Eudossiana, 18-00184 Rome, Italy. (B) LCME, Laboratory of Molecular Chemistry and Environment, University of Savoie, 73376, Le Bourget du Lac Cedex, France. (C) ICSI, Institute of Chemistry of Surfaces and Interfaces, CNRS UPR 9069, 15, rue Jean Starcky BP 2488, 68057 Mulhouse Cedex, France. (D) National Institue of Advanced Industrial Science and Techology (AIST), Tsukuba West, Tsukuba, Ibaraki 305-8569, Japan. | 2009 | 2 | 3 | Italy, France, Japan | Multiwalled carbon nanotubes, MWCN, activation, chemical activation, KOH activation, characterization |
| CST-28.pdf | Electrochemical characterization of Ruthenium oxide on carbon paste electrodes in acid systems. | O. M. Alvarez, M. M. Hernandez | Dpto. Materiales Solares, Centro de Investigación en Energía, Universidad Nacional Autónoma de México, Apartado Postal 34, Temixco, Mor. 62580, México | 2009 | 2 | 3 | Mexico | Ruthenium oxide, RuO2, carbon paste electrode, electrochemical characterization, aqueous electrolyte |
| CST-32.pdf | Physicochemical properties of carbon materials obtained by combustion synthesis of perchlorinated hydrocarbons. | S. Cudziło (A), M. Bystrzejewski (B), A. Huczko (B), M. Pakuła (C), S. Biniak (D, *), A. Świątkowski (A) and M. Szala (A) | (A) Military University of Technology, Kaliskiego 2, 00-908 Warsaw, Poland. (B) Warsaw University, Pasteura 1, 02-093 Warsaw, Poland. (C) Naval University of Gdynia, Smidowicza 69, 81-103 Gdynia, Poland. (D) Nicolaus Copernicus University, Gagarina 7, 87-100 Toruń, Poland. | 2010 | 3 | 1 | Poland | Carbon nanomaterials, combustion synthesis, perchlorinated hydrocarbons, physicochemical properties |
| CST-30.pdf | Ablation morphologies of different types of carbon in Carbon / Carbon composites. | Jian Yin, Hongbo Zhang, Xiang Xiong, Jinly Zuo | State Key Laboratory of Powder Metallurgy Central South University, Lushan South Road, Changsha, P. R. China. | 2010 | 3 | 1 | P. R. China | carbon, carbon-carbon composites, ablation, morphology |
| CST-31.pdf | Batch Kinetics, isotherm and thermodynamic studies of adsorption of strontium from aqueous solutions onto low cost rice-straw based carbons. | S. M. Yakout and E. Elsherif | Hot Laboratories and Waste Management Center, Atomic Energy Authority, Abu Zaabel, Cairo 13759, Egypt. | 2010 | 3 | 1 | Egypt | Kinetics, isotherm, adsorption, strontium, carbon, rice straw |
| CST-41.pdf | Oxygen reduction activity of carbon fibers cathode, and application for current generation from the NAD+ and NADH recycling reaction | H. Maeda (A), H. Nagamoto (B) | (A) Division of Bioinformatics, Graduate School of Engineering, Soka University, Tangi, Hachiouji, Tokyo 192-8577, Japan. (B) Division of Applied Chemistry and Chemical Engineering, Graduate School of Engineering, Kougakuin University, Hachiouji, Tokyo 192-0015, Japan. | 2012 | 4 | 1 | Japan | Carbon fibers, cathode, oxygen reducation, electrochemistry, NAD+, NADH, current generation |
| CST-42.pdf | Adsorption kinetics of E-Coli on different carbon nanoforms. | Md. Shamimul Haque Choudhury (A, B, *), Muhammad Athar Udding (A, B), Md. Nazmul Hasan (A, B), M. Shafiul Alam (A, B), M. Mamunur Rashid (C ) | (A) Department of Electrical and Electronic Engineering, International Islamic University Chittagong, Dhaka – 1205, Bangladesh. (B) Bangladesh University of Engineering and Technology, Polashi, Dhaka – 1000, Bangladesh. (C) Bangladesh Agricultural University Mymensingh, Mymensingh – 2202, Bangladesh | 2012 | 4 | 1 | Bangladesh | Carbon nanomaterials, carbon nano, E-coli, adsorption, kinetics |
| CST-55.pdf | Full-Wave Techniques for the Analysis of Electrodynamics and Coherent Quantum Transport in Graphene Nanodevices | Luca Pierantoni (A, B, *) | (A) Dipartimento di Ingegneria dell’Informazione, Università Politecnica delle Marche, Via Brecce Bianche 1260131, Ancona, Italy. (B) Italian Institute of Nuclear Physics (INFN) – Laboratori Nazionali di Frascati, via Enrico Fermi 40, Frascati (Roma), Italy. | 2012 | 4 | 1 | Italy | Graphene, nanodevices, nanoelectronics, Quantum transport |
| CST-56.pdf | Advanced Modeling of the Electrostatic Field Coupling in Graphene Nanoribbons | Luca Pierantoni (A, B, *) | (A) Dipartimento di Ingegneria dell’Informazione, Università Politecnica delle Marche, Via Brecce Bianche 1260131, Ancona, Italy. (B) Italian Institute of Nuclear Physics (INFN) – Laboratori Nazionali di Frascati, via Enrico Fermi 40, Frascati (Roma), Italy. | 2012 | 4 | 1 | Italy | Graphene nanoribbons, modeling, Electrostatic field coupling |
| CST-57.pdf | Plane-Wave Excitation and Electromagnetic Response of Graphene : Non-Linear Effects | Luca Pierantoni (A, B, *) | (A) Dipartimento di Ingegneria dell’Informazione, Università Politecnica delle Marche, Via Brecce Bianche 1260131, Ancona, Italy. (B) Italian Institute of Nuclear Physics (INFN) – Laboratori Nazionali di Frascati, via Enrico Fermi 40, Frascati (Roma), Italy. | 2012 | 4 | 1 | Italy | Graphene, nonlinear effect, electromagnetic response |
| CST-58.pdf | Thermo-physical properties measurment of water based Fe3O4 nanofluids. | Rohit S. Khedkar (A), A. Sai Kiran (A), Shriram S. Sonawane (A), Kailash L. Wasewar (A), Suresh S. Umare (B) | (A) Department of Chemical Engineering Visvesvaraya National institute of Technology, Nagpur -440010, India. (B) Department of Chemistry, Visvesvaraya National institute of Technology, Nagpur – 440010, India. | 2013 | 5 | 1 | India | Nanofluids, Fe3O4, aqueous, water, Thermo-physical properties, thermal conductivity |
| CST-59.pdf | Synthesis and characterization of CuGeO3 photocatalyst using Green Chemistry and its application for the degradation of direct black dye. | Ashok. V. Borhade (A, *), Yogeshwar R. Baste (A), Dipak R. Tope (A), | (A) Research Centre, Post Graduate Department of Chemistry, HPT Arts and RYK Science College, Nasik 422005, Maharashtra, India. (B) University of Pune, B. C. U. D., Ganeshkhind, Pune – 411007, Maharashtra, India. | 2013 | 5 | 1 | India | Photocatalyst, Photocatalysis, CuGeO3, Green Chemistry, Direct black dye, Photodegradation, dye, water purification |
| CST-60.pdf | Antibacterial activity of Nano-Silver capped by β-Cyclodextrin. | R. Sathiya Priya (A), D. Geetha (A, *), P. S. Ramesh (B) | (A) Department of Physics, Annamalai University, Annamalai Nagar, Tamil Nadu – 608 002, India. (B) Physics Wing DDE, Annamalai University, Annamalai Nagar, Tamil Nadu – 608 002, India. | 2013 | 5 | 1 | India | Nanoparticles, nano-silver, antibacterial, antibacterial activity, Beta Cyclodextrin capping, Synthesis by Chemical method, Bottom-up technique |
| CST-61.pdf | Synthesis and characterization of gold nanoparticles using Ficus religiosa extract. | Kirtee Wani (A), Amit Choudhari (A), Ruchika Kaul-Ghanekar (A, *), Rajeev Chikate (B) | (A) Interactive Research School for Health Affairs (IRSHA), Bharati Vidyapeeth University, Katraj-Dhankawadi, Pune-Satara Road, Pune-411043, Maharashtra, India. (B) Nanoscience group, Department of Chemistry, Post-graduate & Research Center, MES Abasaheb Garware College, Karve Road, Pune-411004, Maharashtra, India. | 2013 | 5 | 1 | India | Gold nanoparticles, Ficus religiosa extract, Chemical synthesis, Bottom-up synthesis, Physico-chemcial characterization, Green Chemistry |
| CST-62.pdf | Nanocrystalline CdTe thin films by electrochemical synthesis | Ramesh S. Kapadnis (A, B), Sanjay B. Bansode (A), Sampat S. Kale (C, *), and Habib M. Pathan (A, *) | (A) Advanced Physics Laboratory, Department of Physics, University of Pune, 411007, India. (B) Material Science Laboratory, M. V. P. Samaj’s, K.T.H. M. College, Nashik, 422002, India. (C) M. V. P. Samaj’s, Arts, Science and Commerce College, Dindori 422209, Nashik, India. | 2013 | 5 | 1 | India | CdTe thin films, nanocrystalline, nanostructures, electrochemical synthesis, electrochemcial deposition, |
| CST-64.pdf | Effect of thermoplastic polyurethane content on properties of PC/TPU blend filled with Montmorillonite | G. M. Shashidhara, S. H. Kameshwari Devi, Shreyas D. K. | Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, JSS Technical Institutions Campus, Mysore – 570006, India. | 2013 | 5 | 1 | India | Polymer blend, PC/TPU blend, thermoplastic, polyurethane, Montmorillonite |
| CST-65.pdf | Effect of temperature on the crystallite size of Lanthanum Cerium Oxide (La2Ce2O7) and its optical properties | Hozefa Tinwala (A, *), D. C. Shah (A) and Jyoti Menghani (B) | (A) Department of Applied Physics, Sardar Vallabhbhai National Institute of Technology, Surat – 395007, India. (B) Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat- 395007, India. | 2013 | 5 | 1 | India | Lanthanum Cerium Oxide (La2Ce2O7), optical properties, crystalline material, |
| CST-66.pdf | Green synthesis of CdFe2O4 nanoparticles and their application for vapor sensing | Sachin Bangale (A, *), Sambhaji Bamane (B) | (A) Department of Chemistry, Gopinath Mahadev Vedak College of Science, Tal-Raigad, Pin – 402111, Maharashtra, India. (B) Metal Oxide Research Laboratory, Department of Chemistry, Dr. Patangrao Kadam Mahavidyalaya, Sangli – 416416, Maharashtra, India. | 2013 | 5 | 1 | India | Green chemistry, Green synthesis, nanoparticles, CdFe2O4, Vapor sensing, sensor |
| CST-67.pdf | In-situ fabrication of cobalt oxide / sulphide mixed phase nanoparticles in Polyphenylenesulphide matrix | Narendra Rumale (A), Shital Shinde (A), Sudhir Arbuj (B), Govind Umarji (B), Manish Shinde (B), Uttamrao Mulik (B), Dinesh P. Amalnerkar (B), Anuj Pokle (C) | (A) ELANTAS Beck India Ltd, Pimpri Pune -411018, India. (B) Centre for Materials for Electronics Technology (C-MET), Panchawati, Off Pashan Road, Pune – 411008, Maharashtra, India. (C ) Icon Analytical Equipment Pvt. Ltd., Mumbai – 400 018, Maharashtra, India. | 2013 | 5 | 1 | India | nanoparticles, cobalt oxide (CoO), Cobalt sulfiude, Polyphenylenesulphide matrix, In-situ synthesis, mixed phase nanoparticles, |
| CST-68.pdf | Effect of precursors on the solid-state synthesis of semiconducting PbS nanostructures | Sujata Kasabe (A), Manish Shinde (B), Parag Adhyapak (B), Uttamrao Mulik (B) and Dinesh P. Amalnerkar (B) | (A) Abasaheb Garware College, Karve Road, Pune – 411004, Maharashtra, India. (B) Centre for Materials for Electronics Technology (C-MET), Panchawati, Off Pashan Road, Pune – 411008, Maharashtra, India. | 2013 | 5 | 1 | India | Solid state synthesis, PbS nanostructures, semiconducting, |
| CST-63.pdf | Eco-friendly synthesis of Graphene using the aqueous extract of Amaranthus dubius | M. Jannathul Firdhouse and P. Lalitha | Department of Chemistry, Avinashilingam Institute for Home Science and Higher Education for Women University, Coimbatore-641043, Tamil Nadu, India. | 2013 | 5 | 2 | India | Graphene, Green Chemistry, Eco-friendly synthesis, Amaranthus dubius |
| CST-69.pdf | Structural characterization of nano-sized Fe2O3-CeO2 catalyst by XRD, EDX and TEM techniques. | V. B. Mane (A), L. H. Mahind (A), K. D. Jadhav (A), S. P. Dagade (A), S. A. Waghmode (B) | (A) Yashwantrao Mohite College, Bharati Vidyapeeth Deemed University, Pune – 411038, Maharashtra, India. (B) Abasaheb Garware College, University of Pune, Pune, Maharashtra, India. | 2013 | 5 | 2 | India | Catalyst, nanoparticles, nano-catalyst, Fe2O3-CeO2, XRD, EDX, EDAX, TEM, Physico-chemical characterization |
| CST-70.pdf | Synthesis and photocatalytic application of α-Fe2O3/ZnO fine particles prepared by two-step chemical method | Patij Shah, K. S. Siddhapara, D. V. Shah and Jigar Pandya | Department of Applied Physics, Sardar Vallabhbhai National Insitute of Technology, Surat – 395007, Gujarat, INDIA. | 2013 | 5 | 2 | India | Photocatalysis, Photocatalytic, Catalyst, Fe2O3, ZnO, fine particles, Synthesis by chemical method |
| CST-71.pdf | Ferromagnetic Ni-doped ZnO nanoparticles synthesized by a chemical precursor method | Jeevan Jadhav, Mahesh Patange and Somnath Biswas | Department of Physics, The LNM Institute of Information Technology, Jaipur-302031, Rajasthan, India. | 2013 | 5 | 2 | India | Doped ZnO, Ni-doped ZnO, Ferromagnetic nanoparticles, chemical method, characterization, magnetic property, doping |
| CST-72.pdf | Effect of heat treatment on MnxZn(1-x)Fe2O4 nanoparticles prepared by mechanochemical method using metal oxides | G. V. S. Kundaikar | Department of Physics, Goa University, Taleigio, Goa – 403 206, India. | 2013 | 5 | 2 | India | Nanoparticles, mechanochemical synthesis, MnxZn(1-x)Fe2O4, metal oxide, heat treatment |
| CST-73.pdf | Magnetic properties of monodispersed α-Fe2O3 nanoparticles synthesized via a chemical precursor. | Mahesh Patange, Jeevan Jadhav, and Somnath Biswas (*) | The LNM Institute of Information Technology, Jaipur-302031, Rajasthan, India | 2013 | 5 | 3 | India | nanoparticles, Fe2O3, Chemical synthesis method, magnetic properties, nanoscience, nanotechnology |
| CST-74.pdf | Synthesis and characterization of composite nanofibers with VARTM and Electrospinning process. | Sachin S. Chavan (A), P. V. Londhe (A), Mukesh K. Sinha (B) | (A) Bharati Vidyapeeth University, College of Engineering, Pune-Satara Road, Pune, India. (B) Defense Material & Stores, Research Development Establishment, GT Road, Kanpur 208013, India. | 2013 | 5 | 3 | India | nanofibers, composite nanofibers, VARTM, Electrospinning, characterization, 1D nanomaterial, One dimensional material |
| CST-75.pdf | Optical and thermal properties of Parkia powder and its blend with Poly(vinyl pyrrolidone). | Eknath Nivrtirao, Anita, and Basavaraja Sannakki (*) | Department of Post Graduate Studies and Research in Physics, Gulbarga University, Gulbarga-585106, Karnataka, India. | 2013 | 5 | 3 | India | Poly(vinyl pyrrolidone), Blend, optical properties, Parkia powder, thermal properties |
| CST-78.pdf | Activated carbons from African oil palm waste shells and fibre for hydrogen storage | Liliana Giraldo (A), Maria Fernanda González-Navarro (B), and Juan Carlos Moreno-Piraján (B) | (A) Facultad de Ciencias, Departamento de Química, Universidad Nacional de Colombia. (B) Facultad de Ciencias, Departamento de Química, Grupo de Investigación en Sólidos Porosos Calorimetría, Universidad de los Andes, Bogotá, Colombia. | 2013 | 5 | 3 | Colombia | Activated carbon, hydrogen storage, oil palm waste shells |
| CST-80.pdf | Impact test on natural fiber reinforced polymer composite materials. | D. Chandramohan and J. Bharanichandar | Department of Mechanical Engineering, Vel Tech. (R. S. Trust), Avadi, Chennai, Tamil Nadu, India. | 2013 | 5 | 3 | India | Polymer composite, natural fiber reinforced, impact test |
| CST-82.pdf | Experimental studies on improving the performance of electrochemical machining of high carbon, high chromium die steel using jet patterns | V. Sathiyamoorthy (A) and T. Sekar (B) | (A) Faculty of Mechanical Engineering, Mahendra Engineering College, Mallasamudram, India. (B) Faculty of Mechanical Engineering, Government College of Engineering, Salem, India. | 2014 | 6 | 1 | India | Electrochemical machining, die steel |
| CST-84.pdf | Mechanical behavior of chemically treated Jute/Polymer composites | Murali B, Chandra mohanan D, Nagoor vali SK, Muthukumarasamy S, and Mohan A. | Department of Mechanical Engineering, Vel Tech. (R. S. Trust) Avadi, Chennai, Tamil Nadu, India. | 2014 | 6 | 1 | India | Jute-polymer composite, Mechanical property, Chemical treatment |
| CST-76.pdf | Mechanical Preparation, characterization and photocatalytic activity of Fe2O3/ZnO and Fe3O4/ZnO | P. Shah, K. S. Siddhapara, D. V. Shah | Department of Applied Physics, Sardar Vallabhbhai National Institute of Technology, Surat – 395007, Gujarat, India. | 2014 | 6 | 1 | India | Photocatalyst, Photocatalytic activity, Fe2O3/ZnO, Fe3O4/ZnO, Mechanical property, characterization |
| CST-86.pdf | Evaluation of dynamics and equilibrium models for the sorption of Basic Violet 3 on activated carbon prepared from Moringa Oleifera fruit shell waste | C. Sumithra (A), S. C. Murugavel (B), S. Karthikeyan (C, *) | (A) Department of Chemistry, Tejaa Shakthi Institute of Technology for Women, Karumathampatti, Coimbatore-641659, TN, India. (B) Department of Basic Sciences, PSG College of Technology, Coimbatore-641004, TN, India. (C) Department of Chemistry, Chikkanna Government Arts College, College Road, Tirupur-641602, TN, India. | 2014 | 6 | 1 | India | Sorption, activated carbon, Moringa Oleifera fruit shell waste, Basic Violet 3 dye, water purification |
| CST-87.pdf | Energy from Biomass – Comparision of biogas production at ambient temperature and at mesophilic temperature in semicontenous anaerobic digester using vegetable market waste | Dhanalakshmi Sridevi V. (A), Srinivasan S. V. (B) | (A) Department of Chemistry, GKM College of Engineering and Technology, Chennai – 600063, India. (B) Environmental Technology Division, Central Leather Research Institute, Adyar, Chennai – 600020, India. | 2014 | 6 | 1 | India | Energy, Biomass, Biogas, anaerobic digester, vegetable waste, Biotechnology |
| CST-92.pdf | Effect of light concentration by flat mirror reflectors on the electrical power output of the photovoltaic panel | Sathyanarayana P. (A), Rajkiran Ballal (A), Girishkumar (B), and Laksmisagar P. S. (C) | (A) Department of Electrical & Electronics Engineering, S.D.M. Institute of Technology, Ujire – 574240, Karnataka, India. (B) Department of Mechanical Engineering, S.D.M. Institute of Technology, Ujire – 574240, Karnataka, India. (c) Department of Physics, S.D.M. Institute of Technology, Ujire – 574240, Karnataka, India. | 2014 | 6 | 1 | India | Solar cell, photovoltaic panel, photovoltaics, mirrors, sunlight, electric power, PV, Light concentration, concentrated light |
| CST-93.pdf | Comparative study on the mechanical properties of banana and sisal woven rovings polyester composites | A. Faizur Rahman (A), B. Giriraj (B) , A. P. Arun (C), B. Sanjay Gandhi (A) | (A) Department of Mechanical Engineering, CSI College of Engineering, 643215 Nilgiris, Tamil Nadu, India. (B) Department of Mechanical Engineering, PSG College of Technology, 641004 Coimbatore, Tamil Nadu, India. (C) Department of Mechanical Engineering, Kumaraguru College of Technology, 641006, Coimbatore, Tamil Nadu, India. | 2014 | 6 | 2 | India | Polymer composite, Polyester composite, banana and sisal woven rovings, mechanical properties |
| CST-91.pdf | Frequency, delay and velocity analysis for intrinsic channel region of carbon nanotube field effect transistors | P. Geetha (A) and R.S.D.Wahida Banu (B) | (A) Department of ECE, Shree Sathyam College of Engineering and Technology, Sankari, India. (B) Government College of Engineering, Salem-636 011, India. | 2014 | 6 | 2 | India | carbon nanotube field effect transistor, FET, CN-FET, Molecular electronics |
| CST-90.pdf | Ultrasound assisted direct transesterification of algae for biodiesel production : Analysis of emission characteristics | Namasivayam Manickam (A), Nivetha Elumalai Selvamani (A), and Gopinath K. P. (B) | (A) Department of Chemical Engineering, Adhiparasakthi Engineering College, Melmaruvathur, India. (B) Faculty of Chemical Engineering, SSN College of Engineering, Chennai, India. | 2014 | 6 | 2 | India | Biodiesel, algae, Ultrasound, emission characteristic, fuel, Biofuel, Green Chemistry |
| CST-95.pdf | Effect of reinforcement of AL-6063 with SiC on mechanical behavior and microstructure of metal matrix composites | M. K. Aravindan (A), K. Balamurugan (B), G. Murali (C ) | (A) Department of Mechanical Engineering, The Kavery College of Engineering, Mecheri, Salem, Tamil Nadu, India. (B) Department of Mechanical Engineering, Institute of Road and Transport Technology, Erode, Tamil Nadu, India. (C ) Department of Mechanical Engineering, Adhiyamaan College of Engineering, Hosur, Tamil, Nadu, India. | 2014 | 6 | 2 | India | Metal matrix composite, SiC, AL6063, Mechanical property |
| CST-96.pdf | Ceiba Pentradenta wood waste activated carbon for waste water treatment | K. Geetha*, N. Velmani , S. Karthikeyan and P. S. Syed Shabudeen | Department of Chemistry, Kalaignar Karunanidhi Institute of Technology, Tamil Nadu, India | 2014 | 6 | 2 | India | activated carbon, water purification, natural precursor, Ceiba Pentradenta wood waste |
| CST-88.pdf | Augmenting natural ventilation using solar heat and free cool energy for residential buildings | N. B. Geetha (A), Sujatha Balasubramaniyan (B), R. Velraj (C ) | (A) Faculty of Mechanical Engineering, GKM College of Engineering and Technology, Chennai, India. (B) GKM College of Engineering and Technology, Chennai, India. (C ) Faculty of Mechanical Engineering, Institute for Energy Studies, Anna University, Chennai, India. | 2014 | 6 | 2 | India | Residential building, solar heat, natural ventilation, energy, |
| CST-99.pdf | Investigations on thermal properties, stress and deformation of Al/SiC metal matrix composite based on finite element method | K. A. Ramesh Kumar (A), K. Balamurugan (B), S. Arungalai Vendan (C ), J. Bensam Raj (D) | (A) Department of Mechanical Engineering, Nandha College of Technology, Erode, India. (B) Department of Mechanical Engineering, Institute of Road and Transport Technology, Erode, India. (C ) School of Electrical Engineering (SELECT), VIT University, Vellore, India. (D) The Raajas Engineering College, Tirunelveli, India. | 2014 | 6 | 3 | India | Metal matrix composite, Finite element method, thermal property, stress, Al/SiC, deformation |
| CST-100.pdf | Effect of multipass cutting on surface roughness in wire electrical discharge machining of metal matrix composites | S. Ramesh (A, *), N. Natarajan (B), V. Krishnaraj (C ) | (A) Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, Tamil Nadu, India. (B) Department of Mechanical Engineering, Sri Ranganathar Institute of Engineering and Technology, Coimbatore, Tamil Nadu, India. (C ) Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India. | 2014 | 6 | 3 | India | Metal matrix composite, surface roughness, wire electrical discharge machining, |
| CST-101.pdf | Process parameters optimization for synthesis of methyl ester from sunflower oil using Taguchi technique | G. Senthilkumar (A, *), K. Balamurugan (B) | (A) Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam 638 401, Tamil Nadu, India. (B) Department of Mechanical Engineering, Institute of Road and Transport Technology, Erode 638 316, Tamil Nadu, India. | 2014 | 6 | 3 | India | methyl ester synthesis, sunflower oil, Taguchi technique, process parameters optimization |
| CST-98.pdf | Physico-chemical characterization studies of activated carbon derived from Sterculia Quadrifida seed shell waste | P. Shanthi (A), K. Jothi Venkatachalam (B), S. Karthikeyan (C) |
(A) Department of Chemistry, Kongunadu College of Engineering and Technology, Thottiam,
Tamil Nadu, India. (B) Department of Chemistry, Anna University of Technology, Tiruchirappalli, Tamil Nadu, India. (C ) Department of Chemistry, Chikkanna Government Arts College, Tirupur, Tamil Nadu, India. |
2014 | 6 | 3 | India | Activated carbon, Sterculia Quadrifida seed shell waste, Chemical activation, water purification, waste water treatment, Green Chemistry |
| CST-102.pdf | Vibration analysis of angular contact ball bearing operated with copper oxide nanoparticles mixed ISO VG 68 lubricating oil | Prakash E. (A, *), Sivakumar K. (B) | (A) Department of Mechanical Engineering, Bannariamman Institute of Technology, Sathyamangalam, Erode, Tamilnadu, India. (B) Department of Mechanical Engineering, Bannariamman Institute of Technology, Sathyamangalam, Erode, Tamilnadu, India. | 2014 | 6 | 3 | India | Copper oxide nanoparticles, ISO VG 68 lubricating oil, vibration analysis, nanofluid |
| CST-103.pdf | Thermodynamic study of the adsorption of chromium ions from aqueous solution on waste corn cobs material | Rafael A. Fonseca-Correa (A), Juan Carlos Moreno-Piraján (A, *), Marlon Bastidas-Barranco (B), Liliana Giraldo (C ) | (A) Facultad de Ciencias, Departamento de Química, Grupo de Sólidos Porosos y Calorimetría, Universidad de los Andes, Colombia, Carrera 1 No 18 A 10, Bogotá, Colombia. (B) Facultad de Ingeniería, Departamento de Ingeniería Mecánica, Universidad de la Guajira, Km 5 Via Maicao, Colombia. (C ) Facultad de Ciencias, Departamento de Química, Universidad Nacional de Colombia, Carrera 30 No 43-00, Bogotá, Colombia. | 2014 | 6 | 4 | Colombia | Adsorption, chromium ions, waste corn cobs material, waste water treatment, water purification, water pollution |
| CST-116.pdf | Efficiency enhancement of wood stove integrated with catalytic combustor and modified chimney | G. Murali, P. Goutham, I. Enamul Hasan, P. Anbarasan, G. Ashok | Department of Mechanical Engineering, Adhiyamaan College of Engineering, Hosur – 635 109, Tamil Nadu, India. | 2014 | 6 | 4 | India | Catalytic combustion, wood stove, energy, Bioenergy, Biofuel |
| CST-107.pdf | Optimization of growth temperature of multi-walled carbon nanotubes synthesized by spray pyrolysis method and application for arsenic removal | S. Mageswari (A), P. S. Syed Shabudeen (B), S. Karthikeyan (C, *) |
(A) Department of Chemistry, Vivekanandha College of Engineering for Women, Tiruchengode, Tamil Nadu, India. (B) Department of Chemistry, Kumaraguru College of Technology, Coimbatore, Tamil Nadu, India. (C ) Department of Chemistry, Chikkanna Government Arts College, Tirupur, Tamil Nadu, India. |
2014 | 6 | 4 | India | Multiwalled carbon nanotubes, spray pyrolysis, arsenic (As) removal |
| CST-113.pdf | Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process | C. Mathalai Sundaram (A, *), R. Sivasubramanian (B), M. Sivakumar (C ) | (A) Department of Mechanical Engineering, Nadar Saraswathi College of Engineering & Technology, Theni, Tamilnadu – 625531, India. (B) Department of Mechanical Engineering, Mangayarkarasi College of Engineering, Madurai, Tamilnadu, India. (C ) Sree Sowdambika College of Engineering, Aruppukkottai, Tamilnadu, India. | 2014 | 6 | 4 | India | Metal matrix composite, electrical discharge machining, powder metallurgy |
| CST-115.pdf | Performance of polymer gears reinforced with sisal woven rovings | A. Faizur Rahman (A, *) and R. Santhosh (A), A. P. Senthil Kumar (B), B. Giriraj (B), A. P.Arun (C ) | (A) Department of Mechanical Engineering, CSI College of Engineering, Nilgiris – 643215, Tamil Nadu, India. (B) Department of Mechanical Engineering, PSG College of Technology, Coimbatore – 641004 Tamil Nadu, India. (C ) Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore-641006 Tamil Nadu, India. | 2014 | 6 | 4 | India | Polymer composite, Gear, Sisal woven rovings, natural fiber reinforced composite, Green Technology |
| CST-119.pdf | Extending the applications of BODIPY to the whole visible spectral region | Jorge Bañuelos* and Iñigo López Arbeloa | Departamento de Química Física, Universidad del País Vasco UPV/EHU, Apartado 644, 48080-Bilbao, Spain. | 2015 | 7 | 1 | Spain | BODIPY, dye, optical properties, luminescence, fluorescence, visible absorption, applications |
| CST-108.pdf | Study of cutting forces in machining of magnesium composite by response surface methodology | M. Saravanakumar (*, A), N. Natarajan (B), V. Krishnaraj (C) | (A) Robert Bosch Engineering and Business solutions Limited, Coimbatore – 641035, India. (B) Department of Mechanical Engineering, Sri Ranganathar Institute of Engineering and Technology, Coimbatore – 641110, India. (C) Department of Production Engineering, PSG College of Technology, Coimbatore – 641004, India. | 2015 | 7 | 1 | India | Composite, response surface method, machining |
| CST-117.pdf | Experimental investigations on aluminum based metal matrix composites with B4C, SiC and Mg | Chellapandi P. (1, 4), Senthil Kumar A. (2), Arungalai Vendan S. (3) | (1) Department of Mechanical Engineering, Jeppiaar Engineering College, Chennai, India. (2) Department of Mechanical Engineering, University College of Engineering, Anna University, Panruti Campus, Panruti, India. (3) School of Electrical Engineering (SELECT), VIT University, Vellore, India. (4) Department of Mechanical Engineering, Anna University, Chennai, India. | 2015 | 7 | 1 | India | Metal matrix composite, B4C, SiC, Mg, Aluminum (Al) |
| CST-104.pdf | Jute fibre reinforced plastic: evaluation of application based properties | J. B. Sajin (A), R. Sivasubramanian (B), R. Nagalingam (C ), M. Sivakumar (D) | (A) Department of Mechanical Engineering, Narayanaguru College of Engineering, Manjalumoodu – 629151, India. (B) Department of Mechanical Engineering, Mangayarkarasi College of Engineering, Madurai – 625402, India. (C ) Department of Mechanical Engineering, Arul College of Technology, Radhapuram – 627 111, India. (D) Department of Mechanical Engineering, Sowdambika college of engineering, Aruppukkottai 626134, Tamil Nadu, India. | 2015 | 7 | 1 | India | Jute fibre reinforced plastic, applications |
| CST-114.pdf | Multiresponse optimization of process variables of power mixed wire electrical discharge machining on AISI 304 stainless steel | Sivakumar M.*, Sivakumar K., Sathish S. | Department of Mechanical Engineering, Bannariamman Institute of Technology, Sathyamangalam, Erode, Tamilnadu, India. | 2015 | 7 | 1 | India | powder mixed wire electrical discharge machining, AlSI304 stainless steel, SS |
| CST-145.pdf | Investigations on temperature distribution in welding of Aluminium alloys to steel using FEM | K. S. Ashraff Ali (1), P. Marimuthu (2), A. Athijayamani (3) | (1) Department of Mechanical Engineering, Thirumalai Engineering College, Kanchipuram, India. (2) Department of Mechanical Engineering, Syed Ammal Engineering College, Ramanathapuram, India. (3) Department of Mechanical Engineering, ACTECH, Karikudi, India. | 2015 | 7 | 1 | India | Aluminum alloy, welding, FEM |
| CST-121.pdf | Monitoring of biogas plants – experiences in laboratory and full scale | B. Habermann, E. Ritzi, F. Schulze | Institute of Agricultural and Urban Ecological Projects affiliated to Berlin Humboldt University (IASP), Berlin, Germany. | 2015 | 7 | 2 | Germany | Biogas, Biogas plant, Commercialization, Biofuel, Methane |
| CST-122.pdf | Identification of metabolically active methanogens in anaerobic digester by DNA Stable-Isotope Probing using 13C-acetate | V. Gowdaman, M. Srikanth | Applied and Environmental Biotechnology Laboratory, Department of Biological Sciences Birla Institute of Technology and Science – Pilani, K. K .Birla Goa campus, Goa – 403726, India | 2015 | 7 | 2 | India | Methanogens, anaerobic digester, food waste, stable-isotope, DNA-SIP, DGGE. |
| CST-123.pdf | Digestate from anaerobic reactor as a potential fertilizer | Navodita Bhatnagar and Srikanth Mutnuri | Applied Environmental Biotechnology Laboratory, Department of Biological Sciences, BITS Pilani K.K. Birla Goa Campus, Goa – 403726, India | 2015 | 7 | 2 | India | digestate, anaerobic digestion, soil-less culture, coconut peat, organic fertilizer |
| CST-124.pdf | Management of Biogas spent slurry for hastening the composting of agro residues. | G. S. Geeta (A), M. Ashwini (A), T. H. Shankarappa (B) | AICRP on RES (Bioconversion technology), M.A.R.S, University of Agricultural Scineces, Dharwad-580 005.Karnataka , India. | 2015 | 7 | 2 | India | Biogas spent slurry, enrichment, groundnut yield |
| CST-125.pdf | Dry fermentation technology for utilization of Bio-energy crops/crop residues for biogas production | Sooch S. S. | School of Energy Studies for Agriculture, Punjab Agricultural University, Ludhiana-141004, Punjab, India | 2015 | 7 | 2 | India | Dry Fermentation, Paddy Straw, Biogas, Batch Process, Anaerobic process |
| CST-126.pdf | The Efficacy of Biogas to Protect Stored Grains from Insect Pests | Chanakya H.N, Parvathi Chandran and Himanshu Kumar Khuntia* | Center for Sustainable Technologies, Indian Institute of Science (IISc), Bangalore 560012, India | 2015 | 7 | 2 | India | Stored grain pest; biogas fumigation; oxygen-deficit environment; insect mortality |
| CST-127.pdf | Implementation of Decentralized Power Generation by Biogas Digester: Policy and Perspective. | Nirmalendunath Ghosh | Ex-Superintending Engineer (Electrical), SEB, Kolkata, India. | 2015 | 7 | 2 | India | Decentralized power generation, Biogas, supply chain management |
| CST-128.pdf | Sustainable treatment potential of mixed algal consortia for domestic waste water : Growth and mixotropy | Priyanka Murthy* and Chanakya H. N. | Centre for Sustainable Technologies, Indian Institute of Science (IISc), Bangalore, India. | 2015 | 7 | 2 | India | Wate water treatment, pollution, water purification |
| CST-130.pdf | Anaerobic co-digestion of food waste and septage – A waste to energy project in Nashik city | Meghanath Prabhu (a), Sachin Waigaonkar (b), Regina Dube (c), Dirk Walther (c) and Srikanth Mutnuri (a, *) | a) Applied Environmental Biotechnology Laboratory, Department of Biological Sciences, Birla Institute of Technology and Science–Pilani, K. K. Birla Goa campus, Near NH17B, Bypass Road, Zuarinagar, 403726, Goa, India. b) Department of Mechanical Engineering, Biological Sciences, Birla Institute of Technology and Science–Pilani, K. K. Birla Goa campus, Near NH17B, Bypass Road, Zuarinagar, 403726, Goa, India. c) Indo-German Environment Programme-ASEM, Sustainable Urban Habitat, Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH, New Delhi, India. | 2015 | 7 | 2 | India and Germany | Food waste, septage, anaerobic, co-digestion, energy, biogas, methane |
| CST-131.pdf | Biogas slurry – An alternative growth media for algae cultivation in algiculture systems with simultaneous reduction algal predation | Abitha R., Chanakya H. N.*, Afreen Aman, Shwetha U. | Centre for Sustainable Technologies, Indian Institute of Science (IISc), Bangalore – 560012, India. | 2015 | 7 | 2 | India | Algae, Slurry, Biogas, Nitrogen, Algal grazers, Algal biofuel |
| CST-132.pdf | Nutrient recovery and energy efficient algal harvest from anaerobic digestor wastewater | Priyanka Murthy and Chanakya H. N.* | Centre for Sustainable Technologies, Indian Institute of Sciene (IISc), Bangalore-560012, Karnataka, India | 2015 | 7 | 2 | India | Mixed algal culture, Nutrient recovery, Harvesting |
| CST-133.pdf | Enhancing anaerobic digestion of poultry litter in field digestors by incorporating in-line pre-digestor assembly | M. J. Barooah (A), A. Borah (A), M. Dutta (B) | (A) Department of Agricultural Engineering, Assam Agricultural University, Jorhat, Assam, India. (B) Department of Chemistry, Mariani College, Assam, India. | 2015 | 7 | 2 | India | Food waste, septage, anaerobic, co-digestion, energy, biogas, methane |
| CST-120.pdf | Preparation of mesoporous carbon from fructose using zinc-based activators | Tutik Setianingsih (A), Indriana Kartini (B), Yateman Arryanto (B) | (A) Department of Chemistry, Brawijaya University , Jl.Veteran 169 Malang, Indonesia. (B) Department of Chemistry, Gadjah Mada University, Jl. Bulaksumur Yogyakarta, Indonesia. | 2015 | 7 | 3 | Indonesia | mesoporous carbon, zinc borosilicate, zinc silicate, zinc borate, fructose, activator |
| CST-146.pdf | Adsorption of Reactive Blue 171 from Aqueous Solution using Low Cost Activated Carbon Prepared from Agricultural Solid Waste: Albizia amara | K. Anitha (*, A) , P. S. Syed Shabudeen (B), S. Karthikeyan (C), and N. Aruna devi (D) | (A) Department of Chemistry, A. P. A. College for Women, Palani, Tamil Nadu, India. (B) Department of Chemistry, Kumaraguru College of Technology, Coimbatore, Tamil Nadu, India. (C) Department of Chemistry, Chikkanna Government Arts College, Tirupur, Tamil Nadu, India. (D) Department of Chemistry, P.S.G.R. Krishnammal College For Women, Coimbatore, Tamil Nadu, India. | 2015 | 7 | 3 | India | Activated Albizia amara pod shell waste carbon, adsorption, Reactive Blue 171. |
| CST-150.pdf | Study of lead ion elimination from aqueous solution in a fixed-bed double column system using longan seed based activated carbon | Sumrit Mopoung* and Vijitr Udeye | Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok, Thailand. | 2015 | 7 | 3 | Thailand | Fixed-bed column, longan seed, activated carbon, lead ion adsorption, water purification |
| CST-152.pdf | Effect of temperature on micropore of activated carbon from sticky rice straw by H3PO4 activation | Sumrit Mopoung (*, A), Supattra Inkum (B), Laddawan Anuwetch (C) | (A) Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok, Thailand. (B) Pu Duang Sueksalai School, Khon Sawan district, Chaiyaphum, Thailand. (C) Yangwittayakhom school, Yang sub-district, Borabue district, Mahasarakham, Thailand. | 2015 | 7 | 3 | Thailand | Microporous activated carbon, temperature, phosphoric acid, sticky rice straw |
| CST-153.pdf | Investigation of composite coated Ti-C-N surfaces with ball-cratering test method | P. Vijayasarathi (A), P. Suresh Prabhu (B) and Gukan Rajaram (C) |
(A) Research Scholar, Department of Mechanical Engineering, Anna University, Coimbatore
– 641047, Tamil Nadu, India. (B) Director of Research, Mechanical Engineering, Karpagam
University, Coimbatore – 641021, Tamil Nadu, India. (C) Associate Professor, Department of Mechanical Engineering, P.S.G.college of Technology, Coimbatore – 641004, Tamil Nadu, India. |
2015 | 7 | 3 | India | Friction and wear resistant; TiCN; SEM-EDAX; PVD coating |
| CST-155.pdf | Experimental Investigation and Analysis of Mechanical Properties of Palm fibre reinforced Epoxy composites and Sisal fibre reinforced Polyester composites | B. Muthu Chozha Rajan (*, A), A. Senthil Kumar (A), V. Madhan(B), P. Paul Pandian(B), and A. Saravanakumaar (A) | (A) Department of Mechanical Engineering, Sethu Institute of Technology, Kariapatti – 626115, Tamil Nadu, India. (B) Department of ME CAD/CAM, Sethu Institute of Technology, Kariapatti-626115, Tamil Nadu, India. | 2015 | 7 | 4 | India | Palm fibre, Sisal fibre, epoxy resin, polyester resin, volume fractions, tensile property, flexural property, impact property, ANSYS. |
| CST-156.pdf | A study on machining parameters for Wire Electrical Discharge Machining of Circular Contouring in Stir Cast AA6063/SiC Composites | I. Balasubramanian (*, A), R. Maheswaran (B), J. Godwin (C) | (A) Department of Mechanical Engineering, VV College of Engineering, Arasoor, Tuticorin – 628656, Tamil Nadu, India. (B) Department of Mechanical Engineering, MEPCO Schlenk Engineering College, Mepco Nagar – 626 005, Virudhunagar district, Tamil Nadu, India. (C) Department of Mechanical Engineering, VV College of Engineering, Arasoor, Tuticorin – 628656, Tamil Nadu, India. | 2015 | 7 | 4 | India | Metal matrix composites, Wire electrical discharge machining, Sparking rate, Spark density, Surface roughness |
| CST-157.pdf | Optimization of process parameters of ECM by RSM on AISI 202 steel | P. Alex John Britto (*, A), N. Lenin (A) | Department of Mechanical Engineering, National Engineering College, Kovilpatti-628503, Tamil Nadu, India. | 2015 | 7 | 4 | India | ECM, MRR, AISI 202 Steel, RSM, Desirability Function, Interaction Graph. |
| CST-160.pdf | Analysis of Composite Leaf Spring Enhanced With Nanoparticles | K. Ganesan (*, A), C. Kailasanathan (B), Y. Kumarasamy (C) | (A) Department of Mechanical Engineering, P.S.R. Engineering College, Sivakasi – 626140, Tamil Nadu, India. (B) Department of Mechanical Engineering, Sethu Institute of Technology, Kariapatti- 626115, Tamil Nadu, India. (C) Department of Mechanical Engineering, P.S.R. Engineering College, Sivakasi – 626140, Tamil Nadu, India. | 2015 | 7 | 4 | India | Leaf spring, BinaniFiber, Epoxy, and Nano clay |
| CST-161.pdf | Evaluation of mechanical properties of natural hybrid fibers, reinforced polyester composite materials | S. Kasiviswanathan, K. Santhanam, and A. Kumaravel | Department of Mechanical Engineering, K.S.Rangasamy College of Technology, Tiruchengode – 637215, Tamilnadu, India. | 2015 | 7 | 4 | India | sisal, banana, polyester resin, E-glass, compression moulding |
| CST-162.pdf | Effect of Coconut Fillers on Hybrid Coconut Kevlar Fiber Reinforced Epoxy Composites | S. P. Jani (A), A. Senthil Kumar (B), A. Adamkhan (C), Nithin (A), and Rajakumar (A) | (A) Department of Mechanical Engineering, Ponjesly College of engineering, Nagercoil, Tamilnadu, India. (B) Department of Mechanical Engineering, sethu institute of technology, Viruthunagar, Tamilnadu, India. (C) International Research Centre, Department of Mechanical Engineering, kalasalingam university. Viruthunager,Tamilnadu, India. | 2015 | 7 | 4 | India | Coconut fibre, coconut shell filler, kevelar fibre, NaOH treatment. |
| CST-163.pdf | Improvement of Corrosion Resistance by Vacuum Arc Evaporation PVD Thin Film TiN Coating | M. P. Bharathimohan (A) and S. Neelakrishnan (B) | Department of Automobile Engineering, PSG College of Technology, Coimbatore-641004, India. | 2015 | 7 | 4 | India | Ceramic coating, Corrosion, PVD, TiN |
| CST-164.pdf | Investigation on Dynamic Analysis of VMC Bed using epoxy Composite | S. Murugan (A) and P. R. Thyla (B) | (A) Department of Mechanical Engineering, The Seshasayee Institute of Technology, Trichy – 620010. Tamilnadu, India. (B) Department of Mechanical Engineering, PSG College of Technology, Coimbatore – 641004, Tamilnadu, India. | 2015 | 7 | 4 | India | Machine tool, damping, epoxy composite and modal analysis |
| CST-154.pdf | Characterization of phosphoric acid modified activated carbon fiber from fiber waste of pineapple leaf fiber production processing | Sumrit Mopoung *, Pornsawan Amornsakchai, Sarocha Somroop | Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok, Thailand. | 2016 | 8 | 1 | Thailand | Activated carbon fiber, fiber waste, pineapple leaf fiber production, phosphoric acid, Green Chemistry, Green technology |
| CST-170.pdf | Synthesis and characterization of graphene-Fe3O4 nanocomposite | Ajinkya G. Nene (1), Makoto Takahashi (1), Prakash R. Somani (2), Hare Ram Aryal (4), Koichi Wakita (3), Masayoshi Umeno (4) | (1) Department of Applied Chemistry, Chubu University, 1200 Matsumoto-cho, Kasugai-shi, Aichi-Ken 487-8501, Japan. (2) Applied Science Innovations Pvt.Ltd., Pune, Maharashtra, India. (3) College of Life and Health Science, Chubu University, 1200 Matsumoto-cho, Kasugai-shi, Aichi-Ken 487-8501, Japan. (4) Institute for General Research of Science, Chubu University, 1200 Matsumoto-cho, Kasugai-shi, Aichi-Ken 487-8501, Japan. | 2016 | 8 | 1 | India and Japan | Graphene, Fe3O4 nanoparticles, nanocomposite, Magnetic nanoparticles |
| CST-172.pdf | Synthesis and characterization of multiwalled carbon nanotubes using Brassica Juncea oil as carbon source | S. Kalaiselvan (A), K. Gopal (B), S. Karthikeyan (C, *) | (A) Department of Chemistry, Hindusthan College of Engineering & Technology, Coimbatore, Tamil Nadu, India. (B) Department of Chemistry, Erode Arts & Science College, Erode, Tamil Nadu, India. (C) Department of Chemistry, Chikkanna Government Arts College, Tirupur, Tamil Nadu, India. | 2016 | 8 | 1 | India | Carbon nanotubes; Spray-pyrolysis; HRTEM; SEM, Raman spectroscopic analysis, Brassica Juncea, Multiwalled carbon nanotubes |
| CST-174.pdf | Synthesis and characterization of chemically activated carbon derived from arecanut shell | A. S. Jadhav (a) and G. T. Mohanraj (b) | (a) Department of Chemical Engineering, AISSMS College of Engineering, Kennedy Road, Pune – 411001, Maharashtra, India. (b) Department of Chemical Engineering & Technology, Birla Institute of Technology, Mesra, Ranchi, Jharkhand – 835215, India. | 2016 | 8 | 1 | India | Areca-nut shell, activated carbon, phosphoric acid, Green Chemistry, Green Technology |
| CST-171.pdf | Comparative study of production of Bio-Indigo by Pandoraea sp. in a two phase-fed batch and continuous bioreactor | Vaishnavi Unde (a), Srikanth Mutnuri (b, *) | (a) Department of Chemical Engineering, BITS-Pilani, K K Birla Goa campus,NH-17B, Zuari nagar, Goa – 403726, India. (b) Applied Environmental Biotechnology Laboratory, Department of Biological Sciences, BITS-Pilani, K K Birla Goa campus,NH-17B, Zuari nagar, Goa – 403726, India. | 2016 | 8 | 1 | India | Continuous reactor, Fed batch reactor, Indigo, Indole. |
| CST-173.pdf | Sunlight assisted photocatalytic degradation of Indigo Carmine using eco-friendly synthesized CdSnO3 | Ashok V. Borhade | Research Centre, Department of Chemistry, HPT Arts and RYK Science College, Nashik, 422005 MS, India. | 2016 | 8 | 1 | India | Mechano-chemical solid state synthesis route, CdSnO3, Photocatalyst, Photocatalysis, Green Chemistry, Indigo Carmine, water purification, dye degradation, sunlight |
| CST-177.pdf | Functionalization and formation of drinking water filter rod from lignite with zeolite, bentonite, and clay | Sumrit Mopoung*, Nimit Sriprang, Jutatip Namahoot, Nantaka Pumfang, Lalita Chuayudom, Weerada Rattanprasit, Siriwan Di-inkaew, Khatriya Jannachai, Dusadeeporn Polkanyim, Rosjaras Bunpum | Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok, Thailand. | 2016 | 8 | 1 | Thailand | water purification, potable water, water filter, zeolite, bentonite, and clay, lignite |
| CST-179.pdf | Experimental investigations and finite element analysis of composite sandwich structures with honeycomb core – Evaluation for strength and quality | S. A. Abdul Sukkur (a), P. Palanisamy (b), K. R. Vijayakumar (b) | a) Research Scholar, Mechanical Engineering Department, Dr MGR Educational and Research Institute University, Maduravoyal, Chennai-600095, India. b) Mechanical Engineering Department, Advanced Research Institute, Dr MGR Educational and Research Institute University, Maduravoyal, Chennai-600095, India. | 2016 | 8 | 1 | India | Honeycomb, Impact strength, Energy, Elastic, Stress-Strain Modulus, Finite element analysis, Composite sandwitch structure |
| CST-184.pdf | Characterization of TiO2 thin films deposited by using dc magnetron sputtering | Nalin Prashant Poddar (*), S. K. Mukherjee | Department of Physics, Birla Institute of Technology, Mesra, Ranchi – 835215, India. | 2016 | 8 | 2 | India | TiO2 thin films, dc magnetron sputtering, characterization, optical properties, photocatalyst |
| CST-185.pdf | Air flow investigations in direct type solar food dryer using computational fluid dynamics | Pankaj K. Gupta | Mechanical Engineering Department, Chhatrapati Shivaji Institute of Technology, Durg, Chhattisgarh, 491001, India. | 2016 | 8 | 2 | India | solar dryer, food dryer, Computational fluid dynamics, solar drying |
| CST-186.pdf | Development of Low Cost Solar Cooker | Pankaj K. Gupta | Mechanical Engineering Department, Chhatrapati Shivaji Institute of Technology, Durg, Chhattisgarh, 491001, India. | 2016 | 8 | 2 | India | solar cooker, sunlight |
| CST-188.pdf | Investigation on the performance and emission parameters of dual fuel diesel engine with mixture combination of hydrogen and producer gas as secondary fuel | A. E. Dhole (1, a, *), R. B. Yarasu (1), D.B. Lata (2) | 1) Department of Mechanical Engineering, Government College of Engineering, Amravati, Maharashtra, India. 2) Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi 835215, India. | 2016 | 8 | 2 | India | diesel engine, hydrogen, producer gas, fuel, alternative fuel |
| CST-189.pdf | Enhancing energy efficiency techniques and strategies | A. G. Matani | Mechanical Engineering, Government College of Engineering, Amravati – 444 604, Maharashtra, India. | 2016 | 8 | 2 | India | energy efficieny |
| CST-190.pdf | ICT applications enhancing energy efficiency | A. G. Matani | Mechanical Engineering, Government College of Engineering, Amravati – 444 604, Maharashtra, India. | 2016 | 8 | 2 | India | ICT applications, energy efficieny |
| CST-191.pdf | Investigation on parameters of methanol fuel and its blend on a diesel dual fuel engine | G. K. Prashant (1), D. B. Lata (2), P. C. Joshi (1) | 1) Department of Space Engineering and Rocketry, Birla Institute of Technology, Mersa, Ranchi-635215, India. 2) Department of Mechanical Engineering, Birla Institute of Technology, Mersa, Ranchi-635215, India. | 2016 | 8 | 2 | India | fuel, methanol, blend, diesel engine, composite fuel |
| CST-192.pdf | Computational study of turbine blade cooling with various blowing ratios | Madhurima Dey (*), Prakhar Jindal, A. K. Roy | Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi – 835215, Jharkhand, India. | 2016 | 8 | 2 | India | turbine blade cooling, blowing, Blowing ratio, Film cooling effectiveness, Fan-shaped hole, Shear stress transport model, computational study |
| CST-193.pdf | Exploitation of endophytic fungus as a potential source of biofuel | Nawed Anjum, Vijay Kant Pandey and Ramesh Chandra | Department of Bioengineering, Birla Institute of Technology, Mesra, Ranchi, India. | 2016 | 8 | 2 | India | Biofuel, fuel, endophytic fungus, Green chemistry |
| CST-194.pdf | Performance Study of Dual Fuel Engine Using Producer Gas as Secondary Fuel | Deepika Shaw (1, *), Shahid Jamal Akhtar (2), Abhishek Priyam (3), Raviranjan Kumar Singh (4) | 1) Department of Mechanical Engineering, R.T.C Institute of Technology, Ranchi, Jharkhand, India. 2) Department of Mechanical Engineering, R.T.C Institute of Technology, Ranchi, Jharkhand, India. 3) Department of Mechanical Engineering, N.I.T Jamshedpur, Jharkhand, India. 4) Department of Mechanical Engineering, N.I.T Jamshedpur, Jharkhand, India. | 2016 | 8 | 2 | India | Producer gas, secondary fuel, fuel, Duel fuel engine, alternative fuel |
| CST-195.pdf | A brief review on experimental film cooling | Prakhar Jindal*, Shubham Agarwal, R. P. Sharma | Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand – 835215, India. | 2016 | 8 | 2 | India | film cooling, review, Gaseous Film Cooling. |
| CST-196.pdf | Energy conversion using Pt-Pd/C anode catalyst in direct 2-propanol fuel cell | S. S. Mahapatra (1) and J. Datta (2) | 1) Department of Chemistry, BIT-Mesra, Ranchi-835215, Jharkhand, India. 2) Department of Chemistry, IIEST, Shibpur, Howrah-711 103, West Bengal, India. | 2016 | 8 | 2 | India | Catalyst, energy conversion, Pt-Pd/C, Platinum, Palladium, Carbon, supported catalyst, direct methanol fuel cell, DMFC, 2-propanol, fuel, alternative fuel, liquid fuel |
| CST-197.pdf | Influence of Li10GeP2S12-type solid electrolyte on cell thermodynamics | Jishnu Bhattacharya (1) and C. Wolverton (2) | 1) Mechanical Engineering Department, Indian Institute of Technology Kanpur, Kanpur, UP-208016, India. 2) Material Science and Engineering, Northwestern University, Evanston, IL-60208, USA | 2016 | 8 | 2 | India and USA, USA | Li-ion battery, solid electrolyte, diffusion, electrochemical energy storage, Li10GeP2S12-type solid electrolyte |
| CST-198.pdf | Study of water tolerance in hydrous ethanol-gasoline blends | T. N. Sreenivasa (1), K. M. Harinikumar (2), Sathyanarayana. A. (3) | 1) Department of Mechanical Engineering, AMC Engineering College, Bangalore, India. 2) Department of Plant Biotechnology, University of Agricultural Science , GKVK, Bangalore, India. 3) Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, India. | 2016 | 8 | 3 | India | ethanol-gasoline blends, fuel, alternative fuel, composite fuel |
| CST-199.pdf | A CAD model for energy efficient offshore structures for desalination and energy conversion | R. Rahul Dev, R. Sharma ( *), R. Sundaravadivelu | Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai, Tamil Nadu – 600 036, India. | 2016 | 8 | 3 | India | energy conversion, desalination, water purification, CAD |
| CST-200.pdf | Numerical investigation of unsteady detonation waves in combustion chamber using Shchelkin spirals | Repaka Ramesh (1), C T Dheeraj Kumar Singh (2), Dr. Gurunadh Velidi (3) | 1) CFD, Aerospace Department, Upes, Dehradun, India. 2) CFD, Aerospace Department, Upes, Dehradun, India. 3) Aerospace Department, Upes, Dehradun, India. | 2016 | 8 | 3 | India | Deflagration-Detonation Transition (DDT), Shchelkin spiral geometry, Pulse Detonation Engine (PDE), hydrogen-air fuel, fuel, alternative fuel |
| CST-201.pdf | Effect of pre-combustion characteristics in pulse detonation engine using shchelkin spiral | C. T. Dheeraj Kumar Singh (1), Repaka Ramesh (2), Gurunadh Velidi (3) | 1) CFD, Aerospace Department, Upes, Dehradun, India. 2) CFD, Aerospace Department, Upes, Dehradun, India. 3) Aerospace Department, Upes, Dehradun, India. | 2016 | 8 | 3 | India | Deflagration-Detonation Transition (DDT), Shchelkin spiral geometry, Combustion, Pulse detonation engines, fuel, shock wave, hydrogen-air fuel, energy conversion |
| CST-202.pdf | Experimental investigation of a single cylinder S.I engine fuelled with gasoline-butanol blends | Naveen Gaur, Darpan Dahiya, and Rohit Singh Lather | Department of Mechanical Engineering The NORTHCAP University, Gurgaon, India. | 2016 | 8 | 3 | India | S.I. Engine, butanol, emissions, performance, gasoline, alcohol, fuel, IC engine, fuel blend, alternative fuel |
| CST-203.pdf | Effect of ZSM-5 catalyst on co-cracking of jatropha oil with bagasse | Shelly Biswas (1, 2, *), D. K. Sharma (1), Rajiv Kumar (3) | 1) Centre for Energy Studies, Indian Institute of Technology Delhi, New Delhi, India. 2) Department of Chemistry , Vel Tech Dr RR & Dr SR Technical University, Avadi, Chennai, India. 3) Department of space Engineering and Rocketry, Birla Institute of Technology Mesra, Ranchi, India. | 2016 | 8 | 3 | India | Catalyst, Catalysis, ZSM-5, jatropha oil, cracking, pyrolysis, bagasse, fixed bed tubular batch reactor, Co-cracking |
| CST-204.pdf | Analysis of a combustion, performance and emission characteristics of a CNG-B20 fuelled diesel engine under dual fuel mode | Pankaj S. Shelke (1), Nitin M. Sakhare (1), Subhash Lahane (1, a, *), Kushal S. Wasankar (2) | 1) Department of Mechanical Engineering, MIT Aurangabad, Maharashtra, India. 2) Department of Mechanical Engineering, Govern College of Engineering, Aurangabad, Maharashtra, India. | 2016 | 8 | 3 | India | Compressed natural gas, dual fuel engine, combustion, emissions, compression ignition, CNG-B20, fuel, diesel engine, duel fuel, alternative fuel, Green Chemistry |
| CST-205.pdf | Effect of EGR on a sationary VCR diesel engine using cottonseed biodiesel (B20) fuel | Nitin M. Sakhare, Pankaj S. Shelke, Subhash Lahane(a, *), A. T. Autee | Department of Mechanical Engineering, MIT Aurangabad, Maharashtra, India. | 2016 | 8 | 3 | India |
EGR, biodiesel (cotton seed), NOx, diesel engine, fuel, diesel engine, Biodiesel,
alternative fuel, Biofuel, Cotton seed oil, emission, exhaust,
|
| CST-206.pdf | Mahua (Madhuca Indica) oil: A potential source for biodiesel production in India | Utkarsh (1, *), Atfa Enam (2), D. Mahto (1), Arbind Kumar (1) | 1) Department of Mechanical Engineering, Birla Institute of Technology, Mesra – Ranchi, Jharkhand, India. 2) Centre for Energy Engineering, Central University of Jharkhand, Ranchi, India. | 2016 | 8 | 3 | India | Madhuca Indica, Mahua oil, Free Fatty Acid (FFA), Transesterification, Biodiesel, Biofuel, fuel, alternative fuel, Madhuca Indica, C. I. Engine, non-edible oil, blend fuel, composite fuel, Liquid fuel, India |
| CST-207.pdf | Performance study of four stroke S.I. engine using upgraded biogas fuel | Jai Prakash (1), Chikesh Ranjan (1), S. K. Dhiman (2), Arbind Kumar (2) | 1) RTC Institute of Technology, Anandi Ormanjhi, Ranchi, INDIA. 2) Birla Institute of Technology, Mesra, Ranchi, INDIA. | 2016 | 8 | 3 | India | upgraded biogas; low grade water scrubber; S.I engine; biogas carburetor; engine emissions, biogas, fuel, alternative fuel, Green chemistry |
| CST-208.pdf | Algae as a Biofuel: Renewable Source for Liquid Fuel | Vijay Kant Pandey (1), Nawed Anjum (1), Ramesh Chandra (1, *) | Department of Bio-Engineering, Birla Institute of Technology Mesra, Ranchi, India. | 2016 | 8 | 3 | India | Biofuels, Algae, Algae oil, Photobioreactor, fuel, alternative fuel, Green chemistry, Algal biofuels, Biomass |
| CST-209.pdf | Protein engineering for biofuel production: Recent development | Nisha Singh, Pragya Prakash and Ramesh Chandra* | Department of Bio-Engineering, Birla Institute of Technology, BIT Mesra Ranchi, India | 2016 | 8 | 3 | India | Biofuel, Protein engineering, cellulase, lipase, fuel, alternative fuel, liquid fuel, biomass, sugar, |
| CST-211.pdf | Analytical study of the optimum mass flow rate of water in a natural circulation solar collector | Dushyant Rathi *, Arbind Kumar | Department of Mechanical Engineering, Birla Institute of Technology, Mesra, India. | 2016 | 8 | 3 | India | Solar collector, Mass flow rate, Overall heat transfer coefficient, Heat removal factor |
| CST-210.pdf | Shorea robusta: A sustainable biomass feedstock | Vishal Kumar Singh, Shubham Choudhary, Ramesh Chandra* and Dinesh Prasad | Department of Bio-Engineering, Birla Institute of Technology, Mesra, Ranchi-835215, Jharkhand, India | 2016 | 8 | 3 | India |
Sustainable, Shorea robusta, Biomass, moisture content, DSC, heat content, empirical formula, fuel, |
| CST-212.pdf | Numerical Investigation of Merged and Non-merged Flame of a Twin Cavity Annular Trapped Vortex Combustor | Pravendra Kumar and D. P. Mishra* | Combustion Laboratory, Department of Aerospace Engineering, Indian Institute of Technology (IIT) Kanpur – 208016, India. | 2016 | 8 | 3 | India | Merged Flame, Trapped vortex combustor and Power loading parameter, Annular Trapped Vortex Combustor, gas turbine engine, fuel |
| CST-213.pdf | Numerical Analysis of Winglet Type Fin-and-Tube Heat Exchanger | Shailesh Kumar Sarangi* and Dipti Prasad Mishra | Department of Mechanical Engineering, Birla institute of technology, Mesra, Ranchi-835215, India. | 2016 | 8 | 3 | India | Winglet Type Fin-and-Tube Heat Exchanger, Winglets, Heat transfer enhancement, heat transfer, fluid flow |
| CST-214.pdf | Algal biomass harvesting by graft copolymer of polyacrylamide on guar gum (GG-g-PAM): a sustainable method for alternative source of energy | Pinki Pal, Jai Prakash Pandey, and Gautam Sen* | Department of Chemistry, Birla Institute of Technology, Mesra, Ranchi – 835215, Jharkhand, India. | 2016 | 8 | 3 | India | Graft copolymer, flocculation, algal biomass harvesting, biofuel, algal biomass, graft copolymer, polyacrylamide, guar gum, harvesting, flocculation process, microwaves, Calorific value |
| CST-216.pdf | Assessment of Hydrogen Generation Potential from Biomass and its Application for Power Generation in Andaman and Nicobar Islands: A Review | Vinaya C. Mathad (1, *) and Subhash Lahane (2) | 1) Centre for Energy Studies, Indian Institute of Technology (IIT) Delhi, New Delhi, India. 2) Subhash Lahane, Department of Mechanical Engineering, MIT Aurangabad, Maharashtra, India. | 2016 | 8 | 3 | India | Bio-Hydrogen, Biomass Gasifcation, Power Generation, Dual Fuel, CO2 emission, alternative fuel, fuel, |
| CST-217.doc | A Computational study on k-kl-ω model for flow field and heat transfer on a cylinder in cross-flow | S. K. Dhiman* and J. K. Prasad | Birla Institute of Technology, Mesra, Ranchi-835215, India. | 2016 | 8 | 3 | India | Cylinder; k-kl-ω model; Nusselt number; pressure coefficient; flow structure |
| CST-218.pdf | Controlled sulfonation of poly(ether sulfone) using phthalic anhydride as catalyst and its membrane performance for fuel cell application | Seikh Jiyaur Rahaman*, M. Mukherjee and G. Sarkhel | Department of Chemical Engineering and Technology, Birla Institute of Technology, Mesra, Ranchi- 835215, Jharkhand, India. | 2016 | 8 | 3 | India |
Polymer electrolyte membrane fuel cell, PEMFC, Sulfonated poly (ether sulfone);
Phthalic anhydride; 1H-NMR; DMA, XRD, TGA, catalyst, catalysis, electrochemistry,
electrochemical reaction, energy conversion, power, voltage, current, electricity |
| CST-220.pdf | Numerical Investigation of Jet Impingement Heat Transfer on a Flat plate | Asem Nabadavis* and Dipti Prasad Mishra | Department of Mechanical Engineering, Birla Institute of Technology-Mesra, Ranchi, Jharkhand, India. | 2016 | 8 | 4 | India | Jet impingement heat transfer; CFD; ANSYS FLUENT. |
| CST-222.pdf | Calcium Ion Removal by KMnO4 Modified Pineapple Leaf Waste Carbon Prepared from Waste of Pineapple Leaf Fiber Production Processing | Sumrit Mopoung and Thaksaphon Bunterm | Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok, Thailand. | 2016 | 8 | 4 | Thailand | Total hardness, calcium ion, magnesium ion, potassium permanganate, pineapple leaf fiber waste carbon, Green chemistry, water purification, activated carbon, porous carbon, potable water |
| CST-182.pdf | Fatigue curve parameters description of AISI 1141 Microalloyed Steel using Gatts equation, Exponential & Hyperbolic function | J. Selvakumar (a), M. D. Mohangift (b), S. Johnalexis (c) | (a) Department of Mechanical Engineering, Paavaai Group of Institutions, Pachal, Namakkal, Tamilnadu, India. (b) Department of Mechanical Engineering, Panimalar Engineering College, Chennai, Tamilnadu, India. (c) Department of Automobile Engineering, Kumaraguru College of technology, Coimbatore, Tamilnadu, India. | 2016 | 8 | 4 | India | Endurance limit, Gatts equation, Microalloyed steel, AISI 1141, stress, mechanical property |
| CST-225.pdf | Experimental wear behaviour of cryogenically treated aluminium 6063 and 8011 materials | K. K. Padmanabhan and R. Bharathbalaji | Department of Automobile Engineering, Karpagam University, Coimbatore, Tamilnadu, India. | 2016 | 8 | 4 | India | cryogenically treated aluminium 6063 and 8011 |
| CST-180.pdf | Preparation of carbon nanosheets from Gelam wood bark and its electrochemical study | Nirwan Syarif (*) and Miswar Prasagi | Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Sriwijaya, Indralaya, Ogan Ilir, Sumatera Selatan 30862, Indonesia. | 2016 | 8 | 4 | Indonesia | Carbon nanosheets from Gelam wood bark, electrochemical study, electrochemistry, Green chemistry |
| CST-224.pdf | Deposition and characterization of amorphous carbon thin film | R. Venkatesh Babu (a), G. Balakrishnan (b, d, *), R. Shivaraman (b), S. Manavalan (c), and J. I. Song (d) | (a) Department of Mechanical Engineering, Bharath Institute of Science and Technology, Bharath University, Chennai-600073, India. (b) Department of Nanotechnology, Centre of Excellence in Patterned Multiferroics & Nanotechnology, Bharath Institute of Science and Technology, Bharath University, Chennai-600073, India. (c) Department of Mechanical Engineering, Bharath Institute of Science and Technology, Bharath University, Chennai-600073, India. d) Department of Mechanical Engineering, Changwon National University, Changwon- 641773, South Korea. | 2016 | 8 | 4 | India and South Korea | amorphous carbon, thin film |
| CST-228.pdf | Interaction of Recombinant Human Regulatory Factor X, 6 DNA Binding Region with Insulin Promoter in vitro | Shruti Balaji and Anasuya Ganguly* | Department of Biological Sciences, Birla Institute of Technology and Science-Pilani (BITS Pilani), K. K. Birla Goa Campus, India – 403726. | 2016 | 8 | 4 | India | transcription factor, recombinant protein expression, electrophoretic mobility shift assay, insulin, diabetes, RFX6. |
| CST-223.pdf | Facile one-spot synthesis of highly porous KOH-activated carbon from rice husk: Response surface methodology approach | Tran Van Thuan (A), Van Thi Thanh Ho (B), Nguyen Duy Trinh (A), Nguyen Thi Thuong (A), Bui Thi Phuong Quynh (A), and Long Giang Bach (A, *) | (A) NTT Institute of High Technology, Nguyen Tat Thanh University, 300A Nguyen Tat Thanh Str., Ward 13, District 4, Ho Chi Minh City, Vietnam. (B) Hochiminh City University of Natural Resources and Environment, 236B Le Van Sy Str., Ward 1, Tan Binh District, Ho Chi Minh City, Vietnam. | 2016 | 8 | 4 | Vietnam | Adsorption of Ni (II), rice husk, response surface methodology, activated carbon, porous carbon, chemical activation, One-pot synthesis, Green Chemistry, water purification |
| CST-229.pdf | Effect of manufactured sand on the durability characteristics of concrete | S. S. SARAVANAN (*), P. JAGADEESH (2) | School of civil & chemical Engineering VIT University, Vellore, Tamil Nadu, India. | 2016 | 8 | 4 | India |
manufactured sand, concrete, building material, Admixtures, durability, rapid chloride
permeability test, sorptivity, Manufactured sand.
|
| CST-226.pdf | Preparation of MnO2 from manganese natural ore. | S. K. Sinha (1, *), Hari Mahto (1), Md. Shahid (2), D. Shikha (2), S. Murugesan (3), E. Mohandas (3) | 1) Department of Physics, Birla Institute of Technology, Mesra 835215 Ranchi, Jharkhand, India. 2) Department of Chemistry, Birla Institute of Technology Mesra 835215 Ranchi, Jharkhand, India. 3) Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam - 603102, Tamilnadu, India. | 2017 | 9 | 1 | India | MnO2, nanoparticles, grain size, band gap. |
| CST-232.pdf | Effect of particle size, load and speed on the dry sliding wear behavior of Aluminium 8011 - SiC composites. | N. Ashok (A) and P. Shanmughasundaram (B) | (A) Department of Mechanical Engineering, Karpagam University, Coimbatore - 641021, India. (B) Department of Automobile Engineering, Karpagam University, Coimbatore - 641021, India. | 2017 | 9 | 1 | India | Load, Sliding speed, Particle size, Taguchi, ANOVA |
| CST-244.pdf | Enhanced dispersibility of carbon black particles by PVA encapsulation using combined heating method. | G. Raghavendra and P. Hima Bindu | Department of Physics, Nizam College, Basheerbagh, Hyderabad, India. | 2017 | 9 | 1 | India | Carbon black, PVA, encapsulation, XRD, SEM, and FTIR, poly vinyl alcohol |
| CST-246.pdf | Sonochemical synthesis & characterization of Dy3+ capped MgSiO3 nanostructures and their photoluminescence studies for display device application. | G. R. Revannasiddappa (1,2,*), M. S. Rudresha (2), H. Nagabhushana (3), R. B. Basavaraj (3), and B. Daruka prasad (4) | 1) Sree Siddaganga College of Arts, Science & Commerce for Women, Tumkur-572102, India. 2) Sri Siddhartha Academy of Higher Education, Agalakote, Tumkur-572105, India. 3) Prof. C.N.R. Rao Centre for Advanced Materials, Tumkur University, Tumkur- 572103, India. 4) Department of Physics, B.M.S Institute of Technology and Management, Yelahanka, Bangalore- 560064, India. | 2017 | 9 | 1 | India | Sonochemical synthesis; Nanophosphor; Photoluminescence; bio-surfactant, fluorescence, optical property, Dy3+ capped MgSiO3 nanostructures, display, white light emission, SEM, TEM, PL, solid state lighting |
| CST-248.pdf | Study of adsorption behavior of methyl orange dye on activated carbon prepared from sugarcane bagasse via chemical activation. | Tawan Chaiwon (A) and Duangdao Channei (B, *) | (A) Department of Chemistry and General Science, Faculty of Education, Valaya Alongkorn Rajabhat University under the Royal Patronage, Pathum Thani 13180, Thailand. (B) Department of Chemistry, Faculty of Science, Naresuan University, Phitsanulok 65000, Thailand. | 2017 | 9 | 1 | Thailand | Sugarcane bagasse, adsorption isotherms, activated carbon, methyl orange, porous carbon, Green chemistry, water purification, chemical activation, dye, pigment |
| CST-257.pdf | Performance analysis of solar photovoltaic arrays under partial shaded conditions | Sathyanarayana P. (A, *), Rajkiran Ballal (B), Girish Kumar (C), Laksmisagar P. S.(D) | (A) Department of Electrical & Electronics Engineering, Shri Dharmasthala Manjunatheshwara Institute of Technology, Ujire – 574240, Karnataka, India. (B) Mangalore Marine College and Technology Mangalore-574144 Karnatak, India. (C) Department of Mechanical Engineering, Shri Dharmasthala Manjunatheshwara Institute of Technology, Ujire – 574240, Karnataka, India. (D) Department of Physics, Shri Dharmasthala Manjunatheshwara Institute of Technology, Ujire – 574240, Karnataka, India. | 2017 | 9 | 1 | India | Partial shading, Global maximum power point, solar photovoltaic array, PV, Solar cells, Solar panel, sunlight, partial shading, electric power, voltage, photocurrent, |
| CST-260.pdf | A study by adsorption calorimetry, effect of resorcinol/catalyst at different ratios using polar and non-polar molecules in the synthesis of carbon aerogels. | R. A. Fonseca-Correa (A), M. J. Bastidas-Barranco (B), L. Giraldo (C), J. C. Moreno-Piraján (* A) | (A) Faculty of Sciences, Department of Chemistry, Research Group in Porous Solids and Calorimetry, University of the Andes. 11711 Bogotá-Colombia. (B) Faculty of Engineering, Group destaCar, University of la Guajira. 440003 Guajira- Colombia. (C) Faculty of Sciences, Department of Chemistry, National University of Colombia. 11001 Bogotá- Colombia. | 2017 | 9 | 1 | Colombia | Aerogels, isotherms, adsorption calorimetry, Langmuir–Sips, In-homogeneous isotherm, carbon aerogel, catalyst, catalysis, catalytic, adsorption, benzene, hexane, methane, methanol and methyl-ethyl-ketone (MEK), non-polar molecule, |
| CST-265.pdf | Estimation of the monthly average global and diffuse solar radiation for the city Bareilly, Uttar Pradesh, India | Akanksha Varshney, K. Namrata, and Bhushan Mahajan | Department of Electrical Engineering, National Institute of Technology, Jamshedpur, India. | 2018 | 10 | 1 | India | Solar constant, solar day length, Bareilly, Uttar Pradesh, monthly avarage global and diffuse solar radiation, sunlight, India |
| CST-266.pdf | Phase change materials for energy conversion | Anurag Gupta (1) and Rajeev Kumar (2) | 1) Department of Mechanical Engineering, Birla Institute of Technology, Ranchi - 835215, Jharkhand, India. 2) Department of Mechanical Engineering, Birla Institute of Technology, Ranchi - 835215, Jharkhand, India. | 2018 | 10 | 1 | India | Phase change material, thermal energy storage, |
| CST-304.pdf | Natural convection in inclined rectangular porous enclosure with diathermal partition wall | Chordiya Jayesh Subhash (1) and Ram Vinoy Sharma (2) | Department of Mechanical Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand, India. | 2018 | 10 | 1 | India | Porous media, partition, natural convection |
| CST-303.pdf | Modeling of quadruple junction solar cell | Ambaty Pravin (1) and Prabha Chand (2) | (1) Energy System Engineering, National Institute of Technology, Jamshedpur, Jharkhand, 831014, INDIA. (2) Mechanical department, National Institute of Technology, Jamshedpur, Jharkhand, 831014, INDIA. | 2018 | 10 | 1 | India | Quadruple junction solar cell, MATLAB/SIMULINK, Genetic algorithum |
| CST-273.pdf | ANFIS model for prediction of water temperature for Scheffler solar reflector | Harsh Deep and Om Prakash | Department of Mechanical Engineering Birla Institute of Technology, Mesra, Ranchi-835215, India. | 2018 | 10 | 1 | India | Scheffler solar reflector, ANFIS, prediction model, heat, heating water |
| CST-269.pdf | Estimation of solar radiation flux using MATLAB for Amravati, Maharashtra, India | Bhushan Mahajan, K. Namrata, and Akanksha Varshney | Department of Electrical Engineering, National Institute of Technology (NIT). Jamshedpur, India. | 2018 | 10 | 1 | India | Solar radiation flux, sunshine hours, day length, global solar radiation, Amravati, Maharashtra, India. |
| CST-270.pdf | Thermo-hydraulic performance of solar air heater having multiple v-shaped rib roughness on absorber plates | Dhananjay Kumar* and Laljee Prasad | National Institute of Technology, Jamshedpur - 831014 India. | 2018 | 10 | 1 | India | Artificial roughness, Friction factor, Nusselt number, Reynolds number, Relative roughness height, Solar air heater, Green technology |
| CST-283.pdf | Exergy based analysis of triangular finned solar air heater | Subhash Chand and Prabha Chand | Department of Mechanical Engineering, National Institute of Technology, Jamshedpur, Jharkhand - 831014, India. | 2018 | 10 | 1 | India | Triangular fin, exergy efficiency, fin spacing ,solar air heater. |
| CST-278.pdf | Experimental performance investigation of air heating solar collector with fins and twisted tapes | Rajesh Kumar and Prabha Chand | Department of Mechanical Engineering, N.I.T Jamshedpur, Jharkhand-831014, India. | 2018 | 10 | 1 | India | Fins, twisted tape, solar air collector, Green technology |
| CST-302.pdf | Mineral matter characteristics of Samleswari block Ib valley coal field, Odisha, India | Priya Ranjan Mishra (1, *), R. Sahu (1), S. Chakravarty (2) and N. Kumar (3) | 1. Department of Metallurgical and Materials Engineering, National Institute of Technology, Jamshedpur - 831014, India. 2. ANC Division, National Metallurgical Laboratory, Jamshedpur - 831 007, India. 3. Indian Institute of Technology IIT (Indian School of Mines), Dhanbad - 826004, India. | 2018 | 10 | 1 | India | Proximate analysis, FactSage, AFT and Samleswari block coalfield. |
| CST-307.pdf | Inkjet printed temperature sensor and its quality characteristics | Lutz Sommer | Faculty of Engineering, Albstadt-Sigmaringen University, 72458, Albstadt, Germany. | 2018 | 10 | 2 | Germany | Low-cost printer, printed temperature sensor, Low-cost printed electronics, temperature, resistance |
| CST-259.pdf | Electronic Phase Selector Switch | Veena Bhat | Faculty of Engineering, Department of Electrical and Electronics Engineering, SDM Institute of Technology, Ujire-574240, Karnataka, India. | 2018 | 10 | 2 | India | Automatic, Phase selector, Power failure, electric power |
| CST-309.pdf | Washing cloths photo-catalytically to reduce global water pollution | Sadhna A. Sawant (a), Prakash R. Somani (b, c, *), Savita P. Somani (a) and S. K. Omanwar (c) | a) Smt. Kashibai Navale College of Engineering, Pune, Maharashtra, India. b) Center for Grand Challenges and Green Technologies, Applied Science Innovations Pvt. Ltd., Dhayari, Sinhagad Road, Pune - 411041, Maharashtra, India (www.cgct.in). c) Department of Physics, Sant Gadge Baba Amravati University, Amravati, Maharashtra, India. | 2018 | 10 | 2 | India | Photocatalysis, TiO2, Water purification, Water Pollution, Grand Challenges, catalyst, photocatalyst, pollution, washing cloths, Global challenge |
| CST-268.pdf | Performance analysis of solar chimney for passive cooling of the building | Bikash Ranjan Pattanayak (1), Prabha Chand (2), and Abhishek Priyam (3) | 1) National Institute of Technology, Jamshedpur - 831014, Jharkhand, India. 2) Department of Mechanical Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand, India. 3) Department of Mechanical Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand India. | 2018 | 10 | 2 | India | Solar chimney, natural ventilation, air inlet position, inclination angle, CFD |
| CST-267.pdf | Waste heat recovery: A review of vapour compression refrigeration system | Abadh Bihari Mandal and Pankaj Kumar | Department of Mechanical Engineering, Birsa Institute of Technology Sindri, Dhanbad, India. | 2018 | 10 | 2 | India | Waste heat recovery, energy efficieny, energy conversion, |
